This product is suitable for in AC rated voltage 450 / 750V and following control, control circuit, a variety of electrical appliances, mobile, radio equipment and lighting lamp holder wiring and protective circuit requirements at low temperature operation of occasions.

Production execution standard: enterprise standard and JB1170-75 standard.

Two, the use of conditions

1, wire conductor long-term working temperature: silicone rubber insulation is not more than 180 degrees; PVC insulation is not more than 70.

2, the lowest ambient temperature of the wire -40;

3, the bending radius should not be less than 8 times the diameter of the cable should not be less than 6 times the diameter of the cable should not be less than times the diameter of the cable.

Three, cable model:

YVFR copper core PVC insulated and sheathed nitrile soft power cable

1 cable for tin plated copper wire braid shield structure should be the prototype number in the "P" to "P1"".

2 if the conductor is to be used with tin plated copper wire, the order should be stated in the model.

YVFB copper core NBR PVC insulated and sheathed flat type soft power cable

YGVFB copper core silicone rubber insulation nitrile PVC sheathed flat type soft power cable

KVFR copper core PVC insulated and NBR sheathed control cables

KVFRP copper core PVC insulated and sheathed copper wire woven nitrile soft control cable shielding

Nitrile KVFB copper core PVC insulated and sheathed flat soft control cable

KGVFB copper core silicone rubber insulation nitrile PVC sheathed flat soft control cable

2, finished control cable should withstand the power frequency AC test voltage 3000V, 5min voltage test, insulation without breakdown.

3, finished power cable should withstand the power frequency AC test voltage 3500V, 5min voltage test, insulation without breakdown.