Anti-corrosion thermal resistance of copper corrosion resistance and corrosion resistance of two types of platinum resistance, anti-corrosion platinum resistance is the most commonly used anti-corrosion thermal resistance. Temperature detector is the most commonly used in the middle and low temperature zone. Its main features are high accuracy, stable performance. Among them, the measurement accuracy of platinum thermal resistance is the highest, it is not only widely used in industrial temperature measurement, but also made standard reference.

1, hot corrosion resistance by multi-layer corrosion (corrosion thermal resistance coating protective tube is usually thick wall 316L and 304L steel overall sintered polytetrafluoroethylene layer and wear and corrosion resistance layer) structure, anti-corrosion effect and the service life of the long-term use of fact checking, many domestic enterprises.

2, anti-corrosion thermal resistance of PTFE anti-corrosion layer of our company uses the most advanced sintering process sintering process, to solve the other manufacturing process can not avoid the problem of easy leakage of the joint. The application of this technology makes the average service life of anti-corrosion thermal resistance and other anti-corrosion products in our company (in the absence of a larger wear environment) more than one year.

3, the use of the site tend to exist at the same time the high velocity measured dielectric particles on thermal resistance and anticorrosive layer of erosion, our hot corrosion resistance in anti-corrosion layer and there is a layer of wear-resistant material layer and in the erosion environment can effectively extend the anti-corrosion layer using life of 8-10 times is different to the others of the same type of hot corrosion resistance.

4, hot corrosion resistance used in all components of the domestic first-class, the entire product performance is stable, reliable, service life longer than the domestic same kinds of anticorrosive thermal resistance several times, long-term work in the temperature is less than or equal to 220 DEG C temperature range.

1, anti-corrosion thermal resistance of PTFE anti-corrosion layer thickness: 1.0mm (also can be specified by the user).

2, the response time of hot corrosion resistance of heat: embalmment, thermal response time variation of about 20% (less than 8S);

3, anti-corrosion thermal resistance of the anti-corrosion layer quality inspection: the use of electric spark micro flaw detection, voltage 12kV, frequency 1.6 x 106Hz not breakdown.

4, anti-corrosion thermal resistance of the working pressure: anti corrosion thermal resistance for the installation of the maximum use of the flange when the pressure 4.0MPa; anti-corrosion thermal resistance of the fixed mode for the F4 connection of the maximum use of the pressure 0.6MPa.

5, anti-corrosion thermal resistance of other technical indicators and general industrial thermal resistance of the same.

6, electrical outlet: M20x1.5, NPTI1/2

7, protection level: IP65

Explosion grade 8, D / / BT4.d / / CT5: isolation

Hot corrosion resistance in the installation and transportation must ensure anticorrosion layer can not be damaged or by external impact and damage of anticorrosion layer will lead to hot corrosion resistance using shortened life expectancy, or completely lost the antiseptic effect.